DEH Stellar Micro Series

3 to 5 TR - (R-410a)

Air Cooled Packaged Air Conditioners 50Hz

Models DEH 036, 048, 060,072 (3, 4, 5,6 Nominal Tons)

YORK STELLAR Units are highly efficient single-package rooftop air conditioners designed for versatile installation. With single refrigerant circuits for efficient operation, these units can be installed on the ground or raised on steel platforms. They come with a variety of factory-mounted options and field-installable accessories, making them suitable for various applications. YORK STELLAR units operate effectively in a wide temperature range from 131°F (55°C) down to 50°F (10°C) and are rated according to AHRI 340/360 standards.

All Standard Units Include

Powder paint finish that meets ASTM B 117, 750-hour salt spray standard.
Single stage cooling provided by single independent refrigeration circuits with expansion valves, filter drier-, high- and low-pressure switches and freezestats.
High efficiency compressors
Side air discharge configuration.
Direct drive arrangement
Totally Enclosed Fan Cooled (TEFC) IP55 Evaporator fan motors with Class F Insulation.

Totally Enclosed Air over (TEAO) IP55 Condenser fan motors with Class F Insulation.
Fresh air intake panel
Copper tubes / Aluminum fins Evaporator coils.
Micro-Channel Aluminum alloy Condenser coils
2-inch disposable filter with easy access.
Rigging holes in base rails for overhead lifting.
Single point power connection.
Complete factory package-tested, charged and wired

Options Available

Heresite Coated Evaporator Coils (factory installed): Coating is applied by spray for maximum corrosion protection
E-Coating Condenser Coils (factory installed).
Copper Tube and Copper Fin Evaporator Coils (factory installed)
Filter Options: The standard units come with 2-inch disposable filters, but you can also opt for 2- inch washable aluminum filters.
Fresh Air Dampers: Manual or motorized
Phase Monitors (factory installed): Design to prevent unit damage, the phase monitor will shut the unit down in an out of phase condition.

Electric Heaters: Electric heat models feature a single power source, a bank of nickel chromium elements mounted at the discharge of the supply air blower, and each element is protected by a high temperature thermal cut-out (HTIC).
Main Disconnect Switch (factory installed): Suitably sized in accordance with the applicable electrical codes.
Thermostat (field installed): For Single stage cooling only and a single stage heating.
Smoke Detectors for supply air & return air: The smoke detectors stop operation of the unit by interrupting power to the control board if smoke is detected within the air compartment.